装配式钢结构变电站新型梁柱节点参数化分析
    点此下载全文
引用本文:路焕军.装配式钢结构变电站新型梁柱节点参数化分析[J].电网与清洁能源,2020,36(12):41~48
摘要点击次数: 100
全文下载次数: 22
作者单位
路焕军 国网陕西省电力公司西安供电公司 
中文摘要:为加快装配式钢结构变电站的建设,研究了一种带C形悬臂段的新型装配式梁柱节点,并进行有限元单调加载分析。讨论了翼缘板厚度、宽度和盖板长度等对节点性能的影响,结果表明:增加翼缘板厚能有效改善悬臂段根部的应力集中;减小翼缘板宽度会使节点出现不同程度的刚体转动,对节点的极限承载力和初始刚度影响较大,下降幅值最大达13.1%和18.9%。
中文关键词:钢结构变电站  梁柱节点  全螺栓连接  应力集中  有限元分析
 
Parametric Analysis of Beam-Column Joints of Substations with Prefabricated Steel Structure
Abstract:In order to speed up the construction of the substation of prefabricated steel structure A new type of fabricated beam-column connection with a C-shaped cantilever section is studied, and the finite element monotonic loading analysis is carried out. The impacts of flange thickness, width and cover length on the joint performance are discussed. The results show that increasing the thickness of the flange plate can effectively improve the stress concentration at the root of the cantilever section, while reducing the width of the flange plate can cause different degrees of rigid body rotation of the joint, which has a greater impact on the ultimate bearing capacity and initial stiffness of the joint, causing an amplitude reduction up to 13.1% and 18.9% respectively.
keywords:steel structure substation  beam-column node  full bolt connection  stress concentration  finite element analysis
查看全文  查看/发表评论  下载PDF阅读器
    《电网与清洁能源》杂志

期卷浏览

关键词检索

最新公告栏

您是第2463848位访问者    Email: psce_sn@163.com
版权所有:电网与清洁能源网 陕ICP备16002958号-1
本系统由北京勤云科技发展有限公司设计