考虑轴向散热的10 kV三芯电缆中间接头稳态热路模型分析
    点此下载全文
引用本文:李新海1,陈昱1,刘均裕1,王学宗2,3.考虑轴向散热的10 kV三芯电缆中间接头稳态热路模型分析[J].电网与清洁能源,2023,39(10):56~62
摘要点击次数: 104
全文下载次数: 60
作者单位
李新海1 1. 南方电网有限责任公司广东中山供电局 
陈昱1 1. 南方电网有限责任公司广东中山供电局 
刘均裕1 1. 南方电网有限责任公司广东中山供电局 
王学宗2,3 2. 中国电力科学研究院有限公司3. 武汉大学电气与自动化学院 
基金项目:智能电网联合基金项目(U2066217);中国南方电网有限责任公司科技项目(GDKJXM20220135)
中文摘要:电缆接头线芯温度计算是实现电缆载流量预测重要环节。该文通过三芯电缆接头结构分析其散热路径,进一步考虑了电缆接头的轴向散热,提出了改进的热路模型。以10 kV三芯电缆中间接头为例开展有限元温度场计算,并根据温度-热源的响应实现稳态热路模型的参数辨识。同时,分析了不同电缆电流以及环境散热条件下稳态热路模型的等效性,与有限元仿真结果吻合良好。该模型可以有效提高电缆接头热点计算的效率。
中文关键词:三芯电缆接头  有限元仿真  轴向散热  稳态温度场  等效热路模型
 
A Steady State Thermal Circuit Model Analysis of the 10 kV 3-Core Cable Joint Considering Axial Heat Dissipation
Abstract:The calculation of the core temperature of the cable joint is an important part of the cable current carrying capacity prediction. In this paper, the heat dissipation path of the three core cable joint is analyzed according to the joint structure. Furthermore, an improved heat path model considering the axial heat dissipation is proposed. Taking the middle joint of the 10 kV three core cable as an example, the finite element temperature field calculation is carried out, and the parameter identification of the steady-state thermal circuit model is realized according to the temperature response. The equivalence of the steady-state thermal circuit model under different cable currents and environmental heat dissipation conditions is analyzed, which is found to be in good agreement with the finite element simulation results. The model can effectively improve the efficiency of hot spot calculation of cable joints.
keywords:3-core cable joint  finite element simulation  axial heat dissipation  steady-state temperature field  equiva-lent thermal circuit model
查看全文  查看/发表评论  下载PDF阅读器
    《电网与清洁能源》杂志

期卷浏览

关键词检索

最新公告栏

您是第3346862位访问者    Email: psce_sn@163.com
版权所有:电网与清洁能源网 陕ICP备16002958号-1
本系统由北京勤云科技发展有限公司设计